Table of Contents
Advertisement
One of the following messages will
subsequently appear in the multifunc-
tion display:
Engine Oil Level
OK
(Canada:
Add 1.0 qt.
to reach max. oil level
Add 1.5 qts.
(Canada:
1.5 liters
)
to reach max. oil level
Add 2.0 qts.
(Canada:
2.0 liters
)
to reach max. oil level
i
If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel ( page 122).
If necessary, add engine oil.
For adding engine oil, see "Adding
engine oil" ( page 299).
For more information on engine oil, see
"Fuels, coolants, lubricants, etc."
( page 451).
Other display messages
If the ignition is not switched on, the fol-
lowing message will appear:
Turn on ignition
to see engine oil level
)
1.0 liter
Switch on the ignition ( page 37).
.
If you see the message:
Observe
Waiting Time
.
If engine is at operating temperature,
wait 5 minutes before repeating check
procedure.
.
If engine is not at operating tempera-
ture yet, you must wait 30 minutes
before checking oil.
If you see the message:
Cannot check engine oil level
with engine on.
Turn off the engine.
.
If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
If the engine is not at operating
temperature yet, you must wait
30 minutes before checking oil.
i
If you want to interrupt the checking
procedure, press button k or j on the
multifunction steering wheel ( page 122).
Operation
Engine compartment
297
Advertisement
Table of Contents
