Table of Contents
Advertisement
6 Handle cap
Installing
Remove wind screen 1 from its stor-
age bag and unfold.
The storage bag is located on the wall
behind the seat backrests.
Attach supporting straps 3 to fasten-
ing pins 4.
i
Make sure the lower wind screen edging is
inserted through the gap 5 between the stor-
age compartment and the rear panel.
Close snap fasteners 2 by pushing in
handle cap 6.
Pull wind screen 1 on molding over
roll bars.
Pull the wind screen edging, not on the
netting itself.
Removing
Pull off wind screen 1 from roll bars.
Open snap fasteners 2 by pulling out
handle cap 6.
Loosen supporting straps 3 from fas-
tening pins 4.
Fold wind screen 1 and put it back
into storage bag.
Controls in detail
Retractable hardtop
247
Advertisement
Table of Contents
