Mercedes-Benz 2009 C-Class Operator's Manual page 173

Storing stations manually with station
memory menu
X
Tune in desired station.
Basic menu is shown in the audio display.
X
Press n when the main area is active.
or
X Select Presets.
The station memory display appears in the
audio display.
The dot in front of a memory position
R
indicates that the currently tuned station is
stored there.
X
Selecting a memory position: Slide
or rotate ymz.
qmr
X
Storing a station to a selected memory
position: Press and hold n until a brief
signal tone sounds.
or
X
Press and hold desired station button
to on keypad, until a brief signal
1 R
tone sounds.
The station is stored.
Autostore – automatic station memory
i This function is not available for Weather
Band/satellite radio. The autostore
function automatically assigns receivable
stations to the memory, sorted according
to reception quality at the moment of
performing the autostore. The stations
which were stored in the station memory
manually are completely lost in this
process. If less than ten stations are found,
the remaining entries are left empty.
Controls in detail
Audio system
X
Press button on audio control unit
b
repeatedly until desired wave band has
been selected.
Basic menu is shown in the audio display.
X
Press n when the main area is active.
or
X
Select Presets.
The station memory display appears in the
audio display.
X
Slide or rotate to select
qmr ymz
Autostore.
X
Press n.
The audio system searches for receivable
stations. A corresponding message is
displayed. The available stations are
automatically stored in memory. The first
received station will be automatically
played.
X
Canceling storage procedure: Select
Cancel and press n while the message
Rewriting memory... is being displayed.
Z
171