Mercedes-Benz 2009 C-Class Operator's Manual page 114

Controls in detail
Power windows
If potential danger exists, proceed as
follows:
Release button j to stop the closing
R
procedure. To open, press and hold
button k. To continue the closing
procedure after making sure that there is
no danger of anyone being harmed by the
closing procedure, press and hold button
j.
Vehicles with KEYLESS-GO:
Release the sensor surface on the
R
outside door handle to stop the closing
procedure.
Immediately pull on the same outside
R
door handle and hold firmly. The door
windows and the tilt/sliding sunroof or
panorama roof will open for as long as the
door handle is held but the door not
opened.
With SmartKey
The SmartKey must be in close proximity to
the driver's outside door handle.
X
Aim transmitter eye of the SmartKey at the
driver's outside door handle.
X
Press and hold button
j
SmartKey until the door windows and the
112
tilt/sliding sunroof or panorama roof are
completely closed.
X
Release button
interrupt the closing procedure.
X
Vehicles with panorama roof: Press and
hold button
more.
The roller sunblinds extend.
X
Release button
interrupt the extending procedure.
With KEYLESS-GO
The KEYLESS-GO feature is available on
Canada vehicles only.
The SmartKey with KEYLESS-GO must be
located outside the vehicle within
approximately 3 ft (1 m) of a door.
X
Close all doors.
X
Touch and hold the sensor surface on an
outside door handle (
door windows and the tilt/sliding sunroof
or panorama roof are completely closed.
i Make sure you are only touching the
sensor surface.
X
Release the sensor surface to interrupt the
on the
closing procedure.
on the SmartKey to
j
on the SmartKey once
j
on the SmartKey to
j
Y page 77) until the
X
Vehicles with panorama roof: Touch and
hold the sensor surface once more.
The roller sunblinds extend.
X
Release the sensor surface to interrupt the
extending procedure.