Service; Vehicle Status Message Memory; Service Menu; Operation - Mercedes-Benz 2009 C-Class Operator's Manual

Controls in detail
Control system
need to search through your entire phone
book.
X
Press button or
( &
Tel menu.
X
Press button s.
X
Press button or
% $
desired number and/or name.
X
Press button or #.
s
The control system dials the selected
phone number.

Service menu

In the Service menu the following functions
are available:
Calling up messages ( Y page 144)
R
Restarting the TPMS (USA only)
R
( Y page 272)
Restarting the Run Flat Indicator (Canada
R
only) ( Y page 270)
Calling up the maintenance service
R
indicator display ( Y page 292)
144
Calling up vehicle malfunction, warning
and system status messages stored in
memory
to select the
Use the vehicle status message memory
function to scan malfunction and warning
messages that may be stored in the system.
to select the
Such messages appear in the multifunction
display and are based on conditions or
system status the vehicle's system has
recorded.
G Warning!
Malfunction and warning messages are
only indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner's and/or driver's
responsibility to maintain the vehicle's
operating safety. Have all required
maintenance and safety checks performed
on the vehicle. Bring the vehicle to an
authorized Mercedes-Benz Center to
address the malfunction and warning
messages.
X to select the Service
Press or
( &
menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
X
Press or to select the
% $
messages function.
X
Press to confirm.
#
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see "Vehicle status messages in the
multifunction display" ( Y page 305).
X
Use or to scroll through the
% $
messages.
If you turn the SmartKey in the starter switch
to position 0 and then back to position 2, all
messages will be deleted from the message
memory.