5.4. Maintenance ................6 5.5. Off-season storage ..............7 6. REMOTE CONTROL UNIT - FOR OPTIMA MODEL ......8 7. POWER SUPPLY - FOR OPTIMA MODEL .......... 10 8. CADDY ASSEMBLY ................11 PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
When not in use store the Pool Cleaner on the Caddy in a shaded area. Use the Pool Cleaner in the following water conditions only: Chlorine Max 4 ppm 7.0 - 7.8 Temperature 6-34°C NaCl Maximum = 5000 ppm PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
fiberglass and liner. fiberglass and liner. For smooth ceramic tiles. For smooth ceramic tiles. Power supply unit Weekly Timer and Full filter bag indicator Filtration Bottom lid and filter Bag Caddy Kit PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
3,4: Fast advance B. Move the handle to the desired Fast speed – for faster position and release the latch but less efficient cleaning to hold the handle in place. action on water-line. PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
Turn the power supply ON. 5.3. Removing the Pool Cleaner from the pool The robot will perform automatic shut-off at the end of the cleaning cycle. Turn off and unplug the power supply. PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
5.4. Maintenance Clean the filter bag with a hose. Periodically clean the brushes with a hose.It is recommended to periodically wash the filter bag in a washing machine. Use gentle cycle program. PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
• Thoroughly clean the filter bag and insert in place • Roll up the cable so that it has no kinks and place on the Caddy • Store the pool cleaner in a protected area either on its Caddy or simply upsidedown PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
1. To change the parameters press the up or down arrows. Direction control 2. To select the parameter settings use the right or left arrows Set / OK button arrows. When you reach the required function press the Set/OK button. PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
Page 11
• After 2 minute if no button is pressed, the Remote Control Unit will shut-down and the Pool cleaner will continue to work in the previous settings. • When the "Ultra-Clean" and "Walls Only" options finish their cycles, the Pool Cleaner will return to default settings. PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
While the robot is working in Weekly Timer mode the LED will blink constantly between cycles. At the end of the week the power supply automatically switches off. You must reschedule the robot. PoolSweePa wallclima / optima Pool Cleaners | Operating Instructions...
Page 15
Customer Service line on 1300 367 866 in Australia, or 0800 654 333 in New Zealand, or send a written letter to Davey at the address listed below. On receipt of your claim, Davey will seek to resolve your difficulties or, if the product is faulty or defective, advise you on how to have your Davey product repaired, obtain a replacement or a refund.
Need help?
Do you have a question about the poolsweepa wallclima and is the answer not in the manual?
Questions and answers