Trip Computer Menu - Mercedes-Benz 2008 M-Class Operator's Manual

Controls in detail
Control system
DSR (Downhill Speed Regulation)
programmed default speed
In the DSR menu, you can program the
default speed the DSR is set to when it is
activated.
You can program the default speed be-
tween 4-10 mph (Canada: 6-18 km/h).
The set value is increased in 1 mph
(Canada: 2 km/h) increments.
Press button è or ÿ repeatedly
until the message DSR Speed
in the multifunction display.
The selection marker is on the current
setting.
178
Press button æ or ç repeatedly
until the desired speed is shown in the
multifunction display.
When DSR is switched on, DSR will use
the programmed default speed to regu-
late the vehicle's speed.
i
Once DSR is switched on, you can adjust the
set speed using the cruise control lever
( page 251).
appears

Trip computer menu

Use the trip computer menu to call up
statistical data on your vehicle.
The following information is available:
Function
Fuel consumption statistics
since start
Fuel consumption statistics
since last reset
Resetting fuel consumption
statistics
Distance to empty
i
When you enter the trip computer menu, you
will always see the fuel consumption statistics
since start first.
Page
179
179
179
180