Maximum Cooling Maxcool - Mercedes-Benz 2008 M-Class Operator's Manual

Controls in detail
3-zone automatic climate control*
Turn temperature control 1
and/or 7 ( page 220) slightly in any
direction.
Heating switches to the temperature
that was set before the front defroster
was switched on.
The indicator lamp on button |
goes out. The indicator lamp on
button 9 comes on.
i
The air conditioning compressor remains on
even if the indicator lamp in button | goes
out. This helps to prevent the windshield from
fogging.
Deactivating
Press button | ( page 220).
The indicator lamp on the button goes
out. Defrosting is turned off.
The previous settings are once again in
effect.
i
To switch off, you can also press
button ´ or U ( page 220).
226
Windshield fogged on the outside
i
Keep this setting selected only until the
windshield is clear again.
Switch the windshield wipers on
( page 61).
Press button U ( page 220).
The indicator lamp on button U
goes out. Air volume and air
distribution are controlled separately
for each zone.
If the automatic air distribution and
air volume are switched off:
Press buttons 8 and Y
( page 220).

Maximum cooling MAXCOOL

If the air distribution control as well as the
airflow volume control are set to U and
there is a high need for cooling, the
MAXCOOL function is activated.
" " appears in the front and rear
MAXCOOL
display.
This provides the fastest possible cooling
of the vehicle interior (when windows and
tilt/sliding sunroof are closed).