Power Outage - GE JDC27GP Use And Care Manual

Control, Clock and Timer
Clock
The clock must be set for [he
cannot be changed during a TIME
BAKE ~yde.
To Set the Clock
Step
Press the CLOCK pad.
1.
Step 2. Press INCREASE or
DECREASE pad to set the time
day.

Power Outage?

After a power outage, when power
is restored the display will flash
and time shown will no longer be
correct.
The display flashes until the clock
is reset. All other functions that
were in operation when the power
went out will have to be
programmed again.
14
Timer
The timer does not control oven
operations. The maximum setting
on the timer is 9 hours and 55
minutes.
To Set The Timer
Step 1. Press the TIMER
ON/OFF pad.
Step 2. Press lNCREASE or
DECREASE pad to set the amount
of time on the timer.
The timer will start automatically
within a few seconds of releasing
the pad.
The timer. as you arc setting it,
will display seconds until 60
seconds is reached.
Then it will display minutes and
seconds until 60 minutes is
reached.
After 60 minutes, it will display
>
hours ( now appears in
"HR '
display) and minutes until the
maximum time of 9 hours and 55
minutes is reached.
To Reset Timer
Press TIMER pad and then press
INCREASE or DECREASE pad
until the time you want shows on
the display.
To Cancel Timer
Press and hold TIMER pad until
the word "TIMER" quits flashing
on the display (about 4 seconds).
Timer Tones
The timer tone is 3 beeps followed
by 1 beep every 6 seconds. If you
would like to remove the one beep
every 6 seconds, press and hold
CLEAR/OFF for 10 seconds.
To return the tone of 1 beep every
6 seconds, press and hold