Power Outage; Convenience Outlet - GE JCAS724 Owner's Manual And Installation Instructions

Using the clock, timer and convenience outlet (on some models)
8
To Reset the Timer
If the display is still showing the time
remaining, you may change it by touching
the TIMER pad, then touch the + or – pads
until the time you want appears in the
display.
To Cancel the Timer
Touch the TIMER pad twice.

Power Outage

If a flashing time is in the display, you have
experienced a power failure. Reset the clock.

Convenience Outlet

The 120V convenience outlet located on
the top of the backguard may be used to
plug in small electrical appliances.
When using the outlet, be sure that the
electrical cord does not rest on or near a
surface unit. If the surface unit is turned
on, the cord will be damaged.
If the remaining time is not in the display
(clock, delay start or cooking time are in
the display), recall the remaining time by
touching the TIMER pad and then touching
the + or – pads to enter the new time you
want.
To reset the clock, touch the CLOCK pad
twice. Enter the correct time of day by
touching the + or – pads. Touch the
START/ON pad.
To reset the circuit breaker, press the
switch located near the outlet on top of
the backguard.