Table of Contents
Advertisement
Getting started
Adjusting
Head restraint height
Warning!
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an
accident.
With a rear seat occupied, make sure to
move the respective head restraint up from
the lowest non-use position and have the
occupant adjust the head restraint properly.
For your protection, drive only with properly
positioned and engaged head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
48
!
Do not attempt to remove front seat head
restraints. They can only be removed by qualified
G
technicians. We recommend that you have this
work carried out by an authorized
Mercedes-Benz Light Truck Center.
Vehicles with memory function*:
Press switch 1 ( page 46) up or
down in direction of arrow.
Vehicles without memory function*:
1 Head restraint
2 Release button
Raising:
Manually adjust the height of head
restraint 1 by pulling it upward.
If head restraint 1 is fully retracted,
push release button 2 in direction of
arrow and pull head restraint 1 up-
ward.
Lowering:
To lower head restraint 1, push
release button 2 in direction of arrow
and press down on head restraint 1.
Advertisement
Table of Contents
