Table of Contents
Advertisement
Controls in detail
Control system
Lighting submenu
Access the
Lighting
submenu via the
Settings
menu. Use the
Lighting
submenu to change the lamp and lighting
settings on your vehicle.
The following functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Setting night security illumination 179
Setting interior lighting delayed
shut-off
Setting daytime running lamp mode
(USA only)
i
This function is not available in countries
where the daytime running lamp mode is
mandatory and therefore in a constant mode.
178
Move the selection marker with
button æ or ç to the
submenu.
Press button j or k repeatedly
until the message
headlamp
appears in the multifunction
display.
Page
The selection marker is on the current
setting.
178
179
180
Press button æ or ç to select
manual operation (
running lamp mode (
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U, the low beam
headlamps are switched on when the
engine is running.
In low ambient light conditions the
Lighting
following lamps will switch on additionally:
Parking lamps
Tail lamps
Lamp circuit
License plate lamps
Side marker lamps
For more information on the daytime
running lamp mode, see "Lighting"
( page 145).
i
For safety reasons, changing the setting for
the daytime running lamp mode is not possible
while the vehicle is in motion. The following
message appears in the multifunction display:
Settings
only possible
at standstill
Manual
) or daytime
Constant
).
For safety reasons, resetting to factory settings
( page 171) while driving will not deactivate the
daytime running lamp mode.
Advertisement
Table of Contents
