Table of Contents
Advertisement
Display message
Check tires
Then restart
Run Flat Indicator
Run Flat Indicator
inoperative
Tire pressure
Check tires
Tire pressure
displayed after
driving for
a few minutes
Possible cause/consequence
There was a warning message about a
loss in the tire inflation pressure and
the Run Flat Indicator has not been
reactivated yet.
The Run Flat Indicator is malfunction-
ing.
The Run Flat Indicator indicates that
the pressure is too low in one or more
tires.
Vehicles with Advanced TPMS*:
The tire inflation pressure is being
checked.
Possible solution
Make sure that the correct tire inflation pressure is set
for each tire.
Then reactivate the Run Flat Indicator ( page 398).
Have the Run Flat Indicator checked by an authorized
Mercedes-Benz Light Truck Center.
Carefully bring the vehicle to a halt, avoiding abrupt
steering and braking maneuvers. Observe the traffic sit-
uation around you.
Check and adjust tire inflation pressure as required
( page 396).
If necessary, replace the wheel ( page 523).
Reactivate the Run Flat Indicator after adjusting the tire
inflation pressure values ( page 398).
Drive the vehicle for a few minutes.
Practical hints
What to do if ...
467
Advertisement
Table of Contents
