Mercedes-Benz 2007 CLK 350 Operator's Manual page 409

Practical hints
Where will I find...?
1 Vehicle tool kit
Wheel wrench
Jack
2 Arrow
3 Minispare wheel, Wheel bolts for
Minispare wheel
4 Vehicle tool kit storage well casing
Remove vehicle tool kit storage well
casing 4.
Remove Minispare wheel 3.
408
Storing the Minispare wheel
Place Minispare wheel 3 in wheel
well.
Place vehicle tool kit storage well
casing 4 over the Minispare wheel.
Make sure arrow 2 on vehicle tool kit
storage well casing 4 points in the
direction of travel.
Place storage well casing ( page 405)
over the vehicle tool kit storage well
casing 4 and turn the retaining screw
( page 405) clockwise as far it will go
to secure the Minispare wheel.
i
Arrow 2 on vehicle tool kit storage well
casing 4 must point in the direction of travel.
Otherwise you cannot place the storage well cas-
ing ( page 405) on top and secure the Minis-
pare wheel with the retaining screw
( page 405).
Disengage trunk floor handle in upper
edge of trunk and lower trunk floor cov-
er.
!
To prevent damage, always disengage trunk
floor handle from upper edge of trunk and lower
trunk floor before closing the trunk.
Warning!
The dimensions of the Minispare wheel are
different from those of the road wheels. As
a result, the vehicle handling characteristics
change when driving with a Minispare wheel
mounted.
The Minispare wheel should only be used
temporarily, and should be replaced with a
regular road wheel as quickly as possible.
®
Do not switch off the ESP when a Minis-
pare wheel is mounted.
G