Mercedes-Benz 2007 CLK 350 Operator's Manual page 247

Controls in detail
Audio system
Accepting an incoming call
If the telephone is active in the background
(reception symbol is visible in the display),
the audio source is muted when an incom-
ing call is received. A ringing tone can be
heard and the caller's telephone number,
or the name under which the telephone
number has been saved in the telephone
book, appears in the display. If the caller's
number is not relayed, CALL
the display.
Press s button.
The call is accepted.
Muting a call
It is possible to mute a call; the caller is
then no longer able to hear you.
Mute on
Press MUT soft key.
MIC MUTE will appear in the display.
Mute off
Press MUT soft key again.
246
Terminating a call
Press t button.
The current call is terminated and the
muted audio source becomes active
again.
Accepting a second incoming call
If you receive another call during an al-
ready active call, you can accept the sec-
will appear in
ond call and switch between the two.
Accepting a second call
Place new call by entering tele-
phone number manually.
i
You will be notified of the second call acous-
tically, but you will not see this in the display.
You are connected to the second
caller; the first caller is kept on hold.
Switching between calls
Press s button.
This switches between the calls.
The non-active call is kept on hold.
Terminating a call
Press t button.
The current call is terminated. The
connection to the caller previously
kept on hold is also interrupted;
however, reconnection is indicated
by an acoustic signal.
Placing a second call
If you wish to place another call during an
already active call, you can place the sec-
ond call and switch between the callers or
combine them into one call. Note that this
feature is dependent on availability from
your mobile phone service provider.
Placing a second call
Place a new call by entering tele-
phone number manually.