ECS P4S5A Manual page 16

6. Apply thermal grease to the top of the CPU.
7. Swing the locking lever down
and hook it under the latch on
the edge of the socket.
8. Snap the four retention legs of
the cooling fan into place.
9. Swing both lock levers on top of the cooling fan to their opposite sides to se-
cure the cooling fan on top of the heatsink.
10. Connect the CPU Cooling Fan
power cable to the CPUFAN
connector.
Note: CPU fan and heatsink installation procedures may vary with the type of
CPU fan/heatsink supplied. The form and size of fan/heatsink may also
vary.
Cooling Fan
Heatsink
Retention Module
12