Table of Contents
Advertisement
Practical hints
Replacing bulbs
Parking and standing lamp bulb
Switch off the lights.
Open the hood ( page 236).
Turn headlamp cover 2 to the left and
remove.
Pull out the bulb socket with the bulb.
Pull the bulb out of the bulb socket.
Insert a new bulb in the socket.
Reinstall the bulb socket.
Replace headlamp cover 2 and turn to
the right until it engages.
i
If the inside of the headlamps is fogged
up, switch the lights on for a sufficient
amount of time.
296
Bi-Xenon* headlamps
Warning!
3
Do not remove the cover
for the
Bi-Xenon headlamp. Because of high voltage
in Bi-Xenon lamps, it is dangerous to replace
the bulb or repair the lamp and its compo-
nents. We recommend that you have such
work done by a qualified technician.
1 Bulb socket for turn signal lamp
2 Cover for high beam flasher, parking
and standing lamp
3 Headlamp cover for Bi-Xenon head-
lamp
G
4 High beam bulb for high beam flasher
5 Bulb holder
6 Parking and standing lamp
High beam bulb for high beam flasher
Switch off the lights.
Open the hood ( page 236).
Turn headlamp cover 2 to the left and
remove.
Advertisement
Table of Contents
