HP ProBook 4445s Maintenance And Service Manual page 52
Hide thumbs
Also See for ProBook 4445s:
- Technical white paper (8 pages) ,
- Getting started manual (56 pages) ,
- User manual (100 pages)
Table of Contents
Advertisement
3.
Grasp the Mylar tab on the hard drive and slide the hard drive to the left (2) to disconnect it from
the system board connector and remove the drive from the drive bay.
4.
If it is necessary to replace the hard drive bracket, open the mylar protective cover (1) and
remove the two Phillips PM3.0×3.0 hard drive bracket screws (2) from each side of the hard
drive (4 total screws).
44
Chapter 4 Removal and replacement procedures
Advertisement
Table of Contents
