Table of Contents
Advertisement
Seat height
Press the switch up or down in the di-
rection of arrow 1.
Seat fore and aft adjustment
Press the switch forward or backward
in the direction of arrow 2.
Adjust to a comfortable seating position
that still allows you to reach the
accelerator/brake pedal safely. The posi-
tion should be as far to the rear as possi-
ble, consistent with ability to properly
operate controls.
i
When moving the seat, be sure that
there are no items in the footwell or
behind the seats. Otherwise you could
damage the seats.
Seat cushion tilt
Press the switch up or down in the di-
rection of arrow 3 until your upper legs
are lightly supported.
Backrest tilt
Press the switch forward or backward
in the direction of arrow 4 until your
arms are slightly angled when holding
the steering wheel.
Head restraint height
Warning!
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint to support the back of
the head approximately at ear level.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.
G
5 Release button
Adjust the height of the head restraints
by pulling them upwards manually.
For a lower position, press release
button 5 and push down on the head
restraints manually.
More information can be found in the
"Controls in detail" section ( page 82).
Getting started
Adjusting
33
Advertisement
Table of Contents
