Table of Contents
Advertisement
Operation
Engine compartment
Within 1 second press knob 1 on the
instrument cluster twice.
One of the following messages will sub-
sequently appear in the indicator:
OK
(Canada:
-1.0 Q
-1.0 L
(Canada:
-1.5 Q
-1.5 L
(Canada:
-2.0 Q
-2.0 L
!
If the message
-2.0 Q
(Canada:
) blinks and a signal
-2.0 L
sounds, add oil according to amount
displayed.
For adding oil ( page 175).
174
If there is excessive engine oil with the en-
gine at normal operating temperature, a
signal sounds and the following message
will blink in the odometer display:
HI
Have excess oil siphoned.
)
If the I symbol flashes in the odometer
)
display field, a proper oil level check can-
)
not be performed.
Wait 5 minutes before repeating check
procedure.
Perform the oil level check with the dip-
stick ( page 173) if it cannot be complet-
ed via the odometer display field. In this
case we recommend that you that you
have the system checked at a
Mercedes-Benz Center.
i
If the : and I symbols are con-
tinuously illuminated after pressing the
left knob on the instrument cluster
twice, and if there is no change in the
odometer display field or the low en-
gine oil level warning lamp comes on, a
malfunction has occurred to the sys-
tem.
Perform the engine oil level check with
the dipstick ( page 173).
If no oil leaks are noted, drive to the
nearest Mercedes-Benz Center to have
the system checked.
See "Practical hints" ( page 200) if the
low engine oil level warning lamp in the in-
strument cluster lights up.
Advertisement
Table of Contents
