Mercedes-Benz 2003 M-Class Operator's Manual page 148

Controls in detail
Driving systems
Setting stored speed ("Resume"
function)
Warning!
The speed stored in memory should only be
set again if prevailing road conditions per-
mit. Possible acceleration or deceleration
differences arising from returning to preset
speed could cause an accident and/or seri-
ous injury to you and others.
Briefly push the cruise control lever to
position 4.
Cruise control will resume the last pre-
viously set speed.
Remove your foot from the accelerator
pedal.
148
Setting a higher speed
Lift the cruise control lever to
position 1 and hold it up until the de-
G
sired speed is reached.
Release the cruise control lever.
The new speed is set.
i
Depressing the accelerator pedal does
not deactivate the cruise control. After
brief acceleration (e.g. for passing),
cruise control will resume the last
speed set.
Setting a lower speed
Depress the cruise control lever to
position 2 and hold it down until the
desired speed is reached.
Release the cruise control lever.
The new speed is set.
i
When you use the cruise control lever
to decelerate, the transmission will au-
tomatically downshift if the engine's
braking power does not brake the vehi-
cle sufficiently.
Fine adjustment in 1.0 mph (1 km/h)
increments
Faster
Briefly tip the cruise control lever in the
direction of arrow 1.
Slower
Briefly tip the cruise control lever in the
direction of arrow 2.
Transmission in LOW RANGE mode
i
The cruise control should not be used
during off-road driving.