Mercedes-Benz 2003 M-Class Operator's Manual page 142

Controls in detail
Loading
Tightening partition net
i
Before tightening the partition net, re-
move the cargo floor plates.
Installation behind the front seats
1 Tie-down hook
2 Ring
142
Installation behind the rear seats
1 Tie-down hook
2 Ring
3 Tensioner
Insert tie-down hook 1 in rings 2.
Pull on loose ends of tie-down straps
until net is tight.
After driving a short distance, check
the tension on the net and retighten if
necessary.
Removing partition net
Lift tensioner 3 upward to a horizontal
position to release tensioning of the
strap.
Disengage tie-down hooks 1 from
rings 2.
Remove mounting hooks 2
( page 141) from holder 1
( page 141).
Roll up and close the partition net.
Store partition net behind rear seat
bench.