Table of Contents
Advertisement
Depending on your vehicle's equipment, you may use
the buttons on the multifunction steering wheel to call
up, control and set the following systems in the
multifunction display:
1
Trip odometer and main odometer, see page 96
Vehicle speed, see page 96
Flexible service system (FSS), see page 114
Engine oil level indicator, see page 117
2
Audio systems, see page 97
Radio, see page 97
CD player (optional), see page 98
Cassette player, see page 99
3
Navigation system (optional), see page 105
4
Malfunction message memory, see page 108
5
Individual settings, see page 110
6
Trip computer, see page 106
After start
After reset
Fuel tank content
7
Telephone (if so equipped), see page 100
Multifunction steering wheel, multifunction display
Instruments
Operation
and controls
Instrument
Driving
cluster display
Press the è or ÿ button repeatedly until the
required system is displayed.
Pressing the è button advances the display to the
next system.
Pressing the ÿ button returns the display to the
previous system.
You may call up additional displays within some of these
categories by pressing the j or k button.
Warning!
A driver's attention to the road must always be his/
her primary focus when driving.
For your safety and the safety of others, selecting
features through the multifunction steering wheel
should only be done by the driver when traffic and
road conditions permit it to be done safely.
Programming individual settings in the system can
only be made while the vehicle is at standstill.
93
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
