Table of Contents
Advertisement
Instruments
Operation
and controls
Towing the vehicle
1
Cover on right side of front bumper
To remove cover:
Press mark on cover in direction of arrow and lift cover
off to reveal threaded hole for towing eye bolt. The
towing eye bolt is supplied with the vehicle tools. Screw
towing eye bolt in to its stop and tighten with lug
wrench.
To reinstall cover:
Engage cover (1) at bottom and press in top securely.
The rear towing eye is located at the right, below the
bumper.
Instrument
Driving
cluster display
Practical hints
Car care
296
Transmission selector lever, manually unlocking
In the case of power failure the transmission selector
lever can be manually unlocked, e.g. to tow the vehicle.
To do so, insert a pin (1), e.g. ball point pen, into the
covered opening below the position "D" of the shift
pattern. While pushing the pin down, move selector
lever from position "P".
After removal of the pin from the opening, the cover will
not close fully. Only after moving the selector lever to
positions "D+" and "D–" does the cover return to its
closed position.
Technical
Index
data
Advertisement
Table of Contents
