Table of Contents
Advertisement
Safety and Security
Occupant safety
Child seat anchors - "LATCH" type
This vehicle is equipped with two LATCH
(Lower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installing of a "LATCH" child
seat with the matching anchor fittings.
The anchors are located behind an uphol-
stery blend.
1 Indicates the position of the anchors
2 Anchors
70
Install child seat according to the
manufacturer's instructions.
!
Make sure that the seat belt for the
center seat can operate freely with a
child seat installed.
i
Non-"LATCH" type child seats may also
be used and can be installed using the
vehicle's seat belt system. Install child
seat according to the manufacturer's
instructions.
Warning!
Children too big for child restraint systems
must ride in back seats using regular seat
belts. Position shoulder belt across chest
and shoulder, not face or neck. A booster
seat may be necessary to achieve proper
belt positioning for children from 41 lbs. to
the point where a lap/shoulder belt fits
properly without one.
Install child seat according to manufactur-
er's instructions.
The child seat must be firmly attached in the
right and left side anchors 2.
An incorrectly mounted child seat may come
loose during an accident which could result
in serious injury or death to your child.
Damaged or impact damaged child seats or
child seat mounting fittings must be re-
placed.
Do not leave children unattended in the ve-
hicle, even if the children are secured in a
G
child restraint system.
Advertisement
Table of Contents
