Table of Contents
Advertisement
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
1 Bulb socket for turn signal lamp
2 High beam bulb
3 Bulb socket for parking and standing
lamp
High beam bulb (Halogen headlamps
only)
Switch off the lights.
Open the hood ( page 261).
Press the clamp and remove headlamp
cover.
Pull electrical connector off.
334
Turn the locking mechanism counter-
clockwise and take out the high beam
bulb 2.
Insert the new high beam bulb so that
the base is in the recess of the holder.
Turn the locking mechanism clockwise.
Plug the connector onto the high beam
bulb.
Align headlamp cover and click into
place.
High beam bulb (Bi-Xenon* headlamps
only)
Warning!
Because of high voltage in Bi-Xenon lamps,
it is dangerous to replace the bulb or repair
the lamp and its components. We recom-
mend that you have such work done by a
qualified technician.
Switch off the lights.
Open the hood ( page 261).
Press the clamp and remove headlamp
cover.
Pull electrical connector off.
Turn the locking mechanism counter-
clockwise and take out the high beam
bulb 2.
Insert the new high beam bulb so that
the base is in the recess of the holder.
Turn the locking mechanism clockwise.
Plug the connector onto the high beam
bulb.
G
Align headlamp cover and click into
place.
Advertisement
Table of Contents
