Table of Contents
Advertisement
Getting started
Driving
Starting with the key
Turn the key in the starter switch to
position 3 and hold until the engine
starts ( page 31).
i
You can also use the "touch-start" func-
tion. Turn the key to position 3 and re-
lease it again immediately. The engine
then starts automatically.
Depress the brake pedal.
The selector lever lock is released.
For information on turning off the engine
with the key, see "Turning off the engine"
( page 51).
Starting with KEYLESS-GO*
You can start your vehicle without a key
using the KEYLESS-GO start/stop button
on the gear selector lever.
44
1 KEYLESS-GO start/stop button
Depress the brake pedal during the
starting procedure. Do not depress ac-
celerator.
The selector lever lock is released.
Press KEYLESS-GO start/stop
button 1 once.
The engine starts automatically.
For information on turning off the engine
with KEYLESS-GO, see "Turning off with
KEYLESS-GO*" ( page 53).
Starting difficulties
!
Ensure that the brake pedal is de-
pressed when starting the engine.
If the engine does not start as described,
carry out the following steps:
If you are starting the engine with the
key, turn key in starter switch to
position 0 and repeat starting proce-
dure.
If you are starting the engine with
KEYLESS-GO*: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO*.
Or:
Start the engine with the key as radio
signals from another source may be in-
terfering with the SmartKey with
KEYLESS-GO*.
Repeat the starting procedure
( page 43). Remember that extended
starting attempts can drain the battery.
Advertisement
Table of Contents
