Black-Box Configuration - Urive Albatross User Manual

20. Black-box configuration (1)

◆ Black Box configuration: when users press
configuration window like below. It is separated with time, screen, voice/image and user
setting tap.
[ Configuration ]
button in the viewer main screen, it shows
1. Play path shows the date and time of the station.
2. Select the button on the Viewer Main screen. select the drive on
connected to a memory card.
3. If you select the Preferences tab, constant mode impulse, the impulse parking
mode, blocking voltage, and parking mode, you can set the usage of the SD.
4. Driving impulse setup : Set up a degree of impact by which an event recording
is activated. Select either 'Fast setup' or 'Manual setup'. Fast setup is sensitive,
normal, in sensitive of the three stages can be selected.
Manual setup is Front and rear, left and right, up and down of the step is
larger value is more insensible. The smaller value is more sensitive. (select : 1
step~10 step)
5. Set the amount of parking mode shock. : Front and rear, left and right, up
and down of the step is larger value is more insensible. The smaller value is
more sensitive. (select : 1 step~10 step)
6. Blocking voltage setup : Blocking voltage setup is reference voltage setup and
separated by a timer set. The reference voltage setup is [11.5V], [11.7V],
[11.9V], [12.1V] to available as a choice to step 4. timer is 6 hours, 12 hours,
24 hours, 48 hours can be selected in four steps. . Select one among total
eight steps.
7. Parking mode set to SD card usage : You can set how much memory of the
SD Card is allocated for recording in the parking mode. Select between 25%
and 50%.
8. When you click the Save button after you select this, the environment setting
is finished.
33