Installation Of Urive Albatross - Urive Albatross User Manual

12. Installation_Urive albatross
1
2
3
4
Clean the spot on the
front window where
the product is
installed.
Remove the paper
from the adhesive
tape on the Mount.
Affix the Mount on
the desired point.
Connect the cables
for the external
camera, GPS
Module and Video
Output (if applicable)
5
6
7
※ Before finishing the installation, please check if the
front/rear video images are properly recorded.
Connect the power
cable to the DC port.
Installation of the power
cables must be conducted by
the authorized workshop.
- Black : GND, (ex) Car body
- Yellow : ACC, (ex) Cigar jack fuse
- Red : BAT(B+), (ex) Emergency light
If the LCD show the
front video image, it is
installed successfully.
18