Commissioning Check List - RIKA cult Installation Instructions Manual

X

Commissioning Check List

Mark box when completed
Inspect the door and glass seals and ensure all handle latches are adjusted correctly.
Check baffle is installed correctly and that the riddling mechanism is operating.
Light the stove and ensure that the fire responds to the operation of the controls and that there are no visible
emissions of the combustion products into the room.
Instruct the user on the use of the tools, operation of the appliance and the summer shut down procedure.
Information in the operating instructions.
Instruct the user never to operate the stove with the furnace door or ash pan door open and that the user is
aware of the requirement of a suitable fire guard where children, the old or infirm may come into contact with
the appliance.
Hand over the installation instructions, operating instructions and completed warranty form to the user. Remind
the owner to return the warranty form for registration.
Complete the Stoves Registration Form and Pass to User for Registration
Carbon Monoxide Alarms
Where a new solid fuel stove is installed in a property a carbon monoxide alarm should be located in the same
room where the appliance is located:
a. on the ceiling at least 300mm from any wall or, if it is located on a wall, as high up as possible (above any
doors and windows) but not within 150mm of the ceiling; and
b. between 1m am 3m horizontally from the appliance.
Carbon monoxide alarms should comply with BS EN 50291:2001 and be powered by a battery designed to
operate for the working life of the alarm. The alarm should incorporate a warning device to alert users when the
working life of the alarm is due to end. Mains-powered BS EN 50291 Type A carbon monoxide alarms with fixed
wiring (not plug in types) may be used as alternative applications provided they are fitted with a sensor failure
warning device.
Information from the Euroheat Technical Team
Euroheat and RIKA have a policy of continual research and development and reserve the right to modify its appliances without prior notice.
We make every effort to ensure that the information provided in this document is correct and accurate at the time of printing. Continued updates
occur to adapt documents to customer requirements and appliance changes. For the latest editions of all Euroheat documentation visit our web site
www.euroheat.co.uk.
We would request that you inform Euroheat of information which you feel is not provided in this document which would assist other users in the
future.
The Euroheat Technical Team
11
© EUROHEAT DISTRIBUTORS (H.B.S) LTD. July 2011 E & OE Instructions Part number IN1210 Ed.2