Electro-Voice Dx46 Owner's Manual page 34

E -V
LECTRO OICE
R
OUTING
Input selections (In-A, In-B or In-A+B) can be applied to any or all of Dx46's six outputs. Choose a desired output
channel from the output menu and press the Edit button to scroll to the Routing window using the Value up/down
arrows.
Using the <SELECT> buttons to navigate to the Source parameter, apply a desired input selection to a selected
output channel using the VALUE up/down buttons to choose between inputs (In-A, In-B or In-A+B).
A P
RRAY ARAMETRIC
Use the < SELECT > buttons to make the top line of the Edit screen active and the Value Up and Down
buttons to navigate to the Array Eq screen. In the ARRAY CONTROL section an 5-band parametric equal-
izer is available for each output.
Use the < SELECT > buttons to navigate to the filter setting (see table below) you wish to adjust, and the Value Up
and Down buttons to alter these settings. Press the Value Up and Down buttons once to increment values by one
unit, or press and hold to scroll rapidly through available values.
Type
Loshelv
Hishelv
PEQ
Lopass
Hipass
Allpass
A D
RRAY ELAY
Use the < SELECT > buttons to make the top line of the Edit screen active and the Value Up and Down buttons to
navigate to the Array Delay screen. In the ARRAY CONTROL section a delay is available for each output.
HINT: The Array Delay parameter can be used for adjusting the individual cabinets within a loud-
speaker cluster, such as a subwoofer array or a center loudspeaker cluster. For example, in a
speaker cluster consisting of two horn-loaded loudspeakers, it is helpful to apply 3-5 mS of
delay to one of the loudspeakers in the cluster to improve the coverage in the overlap of the
horn patterns. Additionally, the array delay provides a convenient section to apply dedicated
delay to individual subwoofer cabinets to create gradient or beam-formed arrays.
Use the < SELECT > buttons to navigate to the delay setting you wish to adjust, and the Value Up and Down but-
tons to alter these settings.
34
OUT 1:Routing
Source: In B
EQ
OUT 1:Array PEQ1
Type: PEQ
Q: 0.7
Frequency Slope / Order
6dB/oct.
12dB/oct.
6dB/oct.
12dB/oct.
20 to 20000 Hz
6dB/oct.
12dB/oct.
1
2
Table 5-11: Array Control EQ
OUT 1:Array Delay
Delay: 7.0
Unit: ms
Active
F:30.0Hz
Gain: 1.0dB
Resp / Q Gain
-
-18.0 to +12.0 dB
-
- 0.40 to 40
-
-
0.4 to 2.0
-
-
-
0.4 to 2.0
Active