Oil And Filter Change - Polaris 2016 RZR XP Turbo Owner's Manual

MAINTENANCE
Engine Oil

Oil and Filter Change

Always change the oil and filter at the intervals outlined in the Periodic
Maintenance Chart beginning on page 79. Always change the oil filter
whenever changing oil.
Access the oil check dipstick through the right rear wheel well. Access
the oil fill cap through the service access panel on the floor of the cargo
box.
The crankcase drain plug is located on the bottom of the crankcase.
Access the drain plug through the access hole under the crankcase.
1. Position the vehicle on a level surface. Place the transmission in
PARK.
2. Clean the area around the crankcase drain plug.
CAUTION! Hot oil can cause burns to skin. Do not allow hot oil to contact skin.
3. Place a drain pan under the
engine crankcase and remove
the drain plug. Allow the oil
to drain completely.
4. Using an oil filter wrench,
turn the filter counter-
clockwise to remove it.
5. Using a clean dry cloth, clean
the filter sealing surface on
the crankcase.
88
Oil Filter