Suspension Settings - Polaris 2016 RZR XP Turbo Owner's Manual

MAINTENANCE

Suspension Settings

FOX Internal Bypass Shocks
FOX internal bypass shocks are position sensitive and become
progressively stiffer as the suspension compresses. To maintain the
intended ride comfort it is important that ride height is maintained to the
factory setting.
Adding extra weight to the vehicle will decrease ride height and cause
the shock to operate in the stiffer bypass zones. To correctly compensate
for added cargo or accessory weight, spring preload should be added to
keep the shock in the optimal zone and maintain ground clearance.
Refer to the following adjustment table to correctly compensate for
weight added to the vehicle.
NOTE: These settings are only guidelines. The spring preload and shock
clickers can be adjusted further to match your personal riding style and
location of weight on the vehicle.
FOX Internal Bypass Shock Adjustments
RZR XP Turbo
Weight Condition
assuming each rider, wearing
gear, is 215 lbs. (97.5 kg)
Riders
Accessories
Driver only
Driver + 1
Driver + 1
Driver + 1
Driver + 1
110
Cargo + Shaded cells indicate factory settings
0 Remove 0.2 inch (5 mm)
preload, front and rear
0 Factory default preload
100 lbs. Add 0.2 inch (5 mm)
(45 kg) preload, front and rear
200 lbs. Add 0.4 inch (10 mm)
(91 kg) preload, front and rear
300 lbs. Add 0.6 inch (15 mm)
(136 kg) preload, front and rear
Spring Preload
Adjustment
Front
Shock
16 clicks out 16 clicks out
12 clicks out 12 clicks out
10 clicks out 10 clicks out
8 clicks out 8 clicks out
6 clicks out 6 clicks out
Rear
Shock