Ez Help Menu; Audio Menu - Zenith B25A10Z Service Manuallines

Parental Lockout Is Active
01:23 Hours Remaining

EZ HELP MENU

The special features EZ Help option may be accessed
using the Left/Right Arrow keys. The EZ Help feature
provides help on certain options. For example, when
the EZ Help feature is activated using the Left/Right
Arrow keys, the EZ Program option is available to access
through the EZ Help menu. Along with the possibility
of accessing any of the following options EZ Program,
Add/Surf/Del, Degaussing, EZ Picture and EZ SoundRite,
there is a simple explanation of the each of the options.
1
The EZ Help has a main screen called EZ Help. This screen
gives a solution to the most common problem that a
customer may encounter; i.e., the correct connection
of the antenna.
EZ DEMO
The Auto Demo is designed to show-off the icon menus
and other icon displays on the sales floor. The Auto
Demo feature can be turned On/Off with the Left/Right
Arrow keys.
Initially, when the feature is activated, as soon as the
OSD times out, the Auto Demo will start. At this point,
pressing any key will temporarily disable the Auto Demo
for 18 seconds, and if the Auto Demo is working and
the Menu key is pressed then the Setup Menu will be
displayed and the Auto Demo feature will be selected
allowing the customer to disable it.
CM151
USER MENUS 221-1387 (Continued)
CH 14
3:35 PM
MONO

AUDIO MENU

All menu items are adjustment with the Left/Right Arrow
keys.
1
BASS
Bass adjustment has 15 steps (0 to 14). The following
figure shows a mark at the center indicating step 7.
TREBLE
Treble adjustment has 15 steps (0 to 14).
BALANCE
Balance adjustment has 29 steps (0 to 28).
AUDIO MODE
There are three audio modes available: Mono, Stereo,
2 nd Audio/SAP.
nd
If 2 Audio/SAP is selected, but the current channel
does not support SAP, then either Stereo or Mono will
be heard.
FRONT SURROUND
Front Surround can be set 'ON' or 'Off', regardless of the
current Audio Mode setting. However, the Front Surround
effect can only be heard when the Audio Mode has been
set to 'Stereo' and a Stereo signal is present. When this
condition exists, there will be a short mute (200ms)
while toggling the Surround 'On' to 'Off', to embellish
Front Surround activation.
SOUND RITE
The Sound Rite feature is used to obtain a uniform
volume level, particularly while changing channels. The
Sound Rite feature can be best demonstrated on a
channel with no signal (snow).
SPEAKERS
The Speaker feature is used to turn off the internal
speakers. It does this by pulling the power amp mute
line.
1-33
CA - 1387 MENUS