Mercedes-Benz 2000 CLK 430 Operator's Manual page 85

Depending on your vehicle's equipment, you may use
the buttons on the multifunction steering wheel to call
up, control and set the following systems in the
multifunction display:
1 Trip odometer and main odometer, see page 88
Flexible service system (FSS), see page 105
Engine oil level indicator, see page 108
2 Audio systems, see page 89
Radio, see page 89
CD player (optional), see page 90
Cassette player, see page 91
3 Navigation system (optional), see page 97
4
Malfunction message memory, see page 100
5 Individual settings, see page 102
6 Trip computer, see page 98
After start
After reset
Fuel tank content
7
Telephone (if so equipped), see page 92
Multifunction steering wheel, multifunction display
Instruments
Operation
and controls
Instrument
Driving
cluster display
Press the è or ÿ button repeatedly until the
required system is displayed.
Pressing the è button advances the display to the
next system.
Pressing the ÿ button returns the display to the
previous system.
You may call up additional displays within some of these
categories by pressing the j or k button.
Warning!
A driver's attention to the road must always be his/
her primary focus when driving.
For your safety and the safety of others,
programming and selecting features through the
multifunction steering wheel should only be done
by the driver when traffic and road conditions
permit it to be done safely, including pulling over to a
safe location where that is required for safe operation.
Practical hints Car care
85
Technical
Index
data