Mercedes-Benz 2000 CLK 430 Operator's Manual page 47

Instruments
Operation
and controls
Seats
Storing
Three sets of seat/head restraint and exterior rear view
mirror positions may be programmed into memory.
After the seat/head restraint and exterior rear view
mirrors are positioned, push memory button (6),
release, and within 3 seconds push position button "1".
A second and third set of positions for the same seat/
head restraint and exterior rear view mirrors can be
programmed into memory by pushing first memory
button (6) and then "2", respectively "3".
Note:
See page 75 for instructions on adjustment of mirrors.
Instrument
Driving
cluster display
Practical hints Car care
Recalling
To recall a seat/head restraint and exterior rear view
mirror position, push and hold position button "1", "2"
or "3" until seat/head restraint and exterior rear view
mirror movement has stopped. The seat/head restraint
and exterior rear view mirror movement stops when the
position button is released.
Caution!
Do not operate the power seats using the memory
button if the backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
First move the backrest to an upright position.
Technical
Index
data
47