Alpine iDA-X303 Owner's Manual page 37

01GB00iDAX303.book Page 35 Wednesday, October 29, 2008 11:19 AM
<JAPANESE CAR>
This unit
Ground Lead
3
*
• Secure the ground lead of the unit to a clean metal spot using a screw
3
(* ) already attached to the vehicle's chassis.
iPhone/iPod Connection (sold separately)
Connect USB cable to an iPhone/iPod with Interface cable for
iPod.
Interface cable for iPod (supplied)
Remove the iPhone/iPod
Remove the iPhone/iPod from Interface cable for iPod.
• Remove the iPhone/iPod after the unit has been changed to a source
other than the USB IPOD. If the iPhone/iPod is removed while
playing, data may be lost.
• If sound is not output or the iPhone/iPod is not recognized even when
the iPhone/iPod is connected, remove the iPhone/iPod once, then
connect it again, or reset the iPod.
• Do not leave the iPhone/iPod in a vehicle for a long time. Heat and
humidity may damage the iPhone/iPod and you may not be able to
play it again.
01GB06iDAX303.fm
Front Frame
Screws (M5 × 8)
(Included)
Mounting Bracket
USB cable
USB memory Connection (sold separately)
Connect USB memory
1. Connect the USB cable to the USB connector of the unit, and
then secure the connection using the lock case supplied with
USB cable as shown below.
This unit
lock case
2. Connect USB memory to USB cable.
This unit
USB connector
Cable (supplied)
Remove USB memory
Pull out USB memory squarely from the USB cable.
This unit
USB connector
Cable (supplied)
• When removing USB memory, pull it out straight.
• If sound is not output or USB memory is not recognized even when
USB memory is connected, remove USB memory once, then connect
it again.
• Change to a source other than the USB memory mode, then remove
the USB memory. If the USB memory is removed in the USB memory
mode, data may be damaged.
• Route the USB cable away from other cables.
Portable Audio Player Connection (sold separately)
Connecting a Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
Disconnect the Portable audio player.
Disconnect the cable supplied with the Portable audio
player from the USB cable.
• Refer also to the Owner's Manual of the Portable audio player.
ALPINE iDA-X303 68-14470Z02-A (EN)
USB memory
(sold separately)
USB memory
(sold separately)
USB memory
(sold separately)
35
-EN