GE JET340D Use And Care Manual page 6

Features of Your Touch Control Panel
The touch control panel allows you
In addition to microwave or con-
ture cooking (AUTO ROAST). Or
to set the oven controls electroni-
vection cooking, you have combi-
You may make your own 2 stage
tally with the touch of a finger. It's
nation cooking which uses both
programs to suit your individual-
designed to be easy to use and
methods, automatic microwave
ized cooking needs.
understand. With your new oven,
cooking (AUTO COOK), and
you have several cooking options.
automatic combination tempera-
Display. Displays time of day, time
or temperature during cooking
functions, cooking mode and perti-
nent instructions after setting each
part of cooking steps telling you
\
what to do next.
Time Cook. Touch this pad before
entering cooking time during micro-
wave, convection or combination
cooking modes. Oven is pro-
grammed for Power Level 10
\
\
automatically but may be changed
after entering time.
Convection Oven Temp. When
Convection Cooking, touch this
pad before entering desired oven
temperature. (See pages 22 and 23.)
Defrost.
Gentle, even thawing with
little or no attention. (See page 20.~
Number Pads. Touch these pads to
enter time (time of day or cooking
time), internal food temperature '
(using Probe), oven temperature as
shown on each pad and Power
Level or Codes during Automatic
Cooking.
Power Level. Touch this pad before
entering another power level num-
ber whenever microwave energy is
being used.
Auto Cook. Touch this pad and
then number pad for desired Code
number, and oven automatically
microwaves at pre-programmed
Power levels and determines the
proper amount of cooking times
/
until the food is done and oven
1( \
shuts off.
/'
\
Auto Roast. Insert probe, touch z
this pad, and desired number pad
for Code to combination tempera-
ture cook meat with automatic
nreset tmomam.
Clock Set/Start. When oven is first
plugged in, all segments on display ~
are shown. Push the Clock Set
Button. "Enter Time" flashes, colon
remains on, and the four 8's disap-
pear. Enter time of day by touching
the Number Pads in sequence. For
example, for 1:30, touch 1, 3 and O.
Push the Clock Set Button. Time is
set on display. You must set the
Clock before oven will operate. To
reset or change time, push Clock
Set Button, enter correct time and
push Clock Set Button again.
Food Temp (Use Probe). Touch
before entering finished internal
food temperature as registered by
the temperature probe. This pad
must be used whenever probe is
used except when Auto Roast
function is used.
Delay Start/Timer. This feature
can be used as a regular kitchen
timer or as a delay timer before
beginning cooking. (See page 29.)
Combination Cook (See Cook-
book). Touch this pad first when
using Combination Cooking mode.
(See pages 24 and 25.)
Clear/Off. When touched once, it
stops oven function temporarily
just the same as opening the door.
To continue cooking touch
START. To turn oven off and to
cancel cooking, touch CLEAR/ OFF
twice. Touching CLEAR/ OFF
once and opening door cancels
cooking function.
Start. Must touch this pad for oven
to begin any function.