Kyocera QCP-2035 Quick Service Programming Instructions page 2

QCP-2035 – Quick Service Programming Instructions
2
11. The ESN screen appears after
12. Press the left arrow of the
13. Using the keypad, enter the ten-
14. Press the left arrow of the
15. Enter the home system ID (SID)
16. Press the left arrow of the
17. Enter the name to be associated
18. Press the left arrow of the
19. Basic system programming is
20. Press the left arrow of the
21. The phone powers off.
Kyocera Wireless Corp. Proprietary
the Please Waiting Reading
Service Parameters message.
Navigation key to select OK.
digit mobile phone number
assigned by the carrier.
Navigation key to select OK.
of the local carrier network.
Navigation key to select OK.
with this mobile phone (personal
name, company name, etc.).
Navigation key to select OK.
complete.
Navigation key to select EXIT.
Procedures
80-B6718-6 X1