Trouble Shooting; Repairs - Elektra Beckum MEGA 700 D Instruction Manual

ENGLISH
•
Ratchet Wrench RS 320
(not illustrated)
due to narrow design and rubber-
covered ratchet head it is well suited
for automotive applications and
work in confined areas.
Stock-no. 090 105 4541
•
Ratchet Wrench RS 220 Set
(not illustrated)
this set comes complete with many
accessories.
Stock-no. 090 100 6717
•
Air Screwdriver DS 1610
(not illustrated)
reversible with quick
action.
Stock-no. 090 101 2440
Spraying
J Spray Gun SPP 161
for spraying degreaser, oil, liquid
wax, etc.
Stock-no. 090 105 4525
•
Combination Spray Gun UBS 820
(not illustrated)
for commercially available
screw-top cartridges.
Stock-no. 090 105 4479
Air hoses
K Hose Reel ST 200
swivels through 360°; with 30 m PU
air hose.
Stock-no. 090 105 4568
•
Braided Air Hose (not illustrated)
c/w quick coupler and male plug;
length 5 m; outer diameter 12 mm;
inner diameter 6 mm.
Stock-no. 090 105 4908
•
Braided Air Hose (not illustrated)
c/w quick coupler and male plug;
length 10 m; outer diameter 12 mm;
inner diameter 6 mm.
Stock-no. 090 105 4916
•
Braided Air Hose (not illustrated)
c/w quick coupler and male plug;
length 10 m; outer diameter 15 mm;
inner diameter 9 mm.
Stock-no. 090 105 4924
•
Bulk Braided Air Hose
(not illustrated)
length 50 m; outer diameter 15 mm;
inner diameter 9 mm.
Stock-no. 090 105 4932
•
Self-storing Coil Air Hose, Rilsan
(not illustrated)
c/w quick coupler and male plug;
2.5 m working length; outer diame-
ter 8 mm; inner diameter 6 mm.
Stock-no. 090 105 4940
•
Self-storing Coil Air Hose, Rilsan
(not illustrated)
c/w quick coupler and male plug;
7.5 m working length; outer diame-
ter 8 mm; inner diameter 6 mm.
Stock-no. 090 105 4959
16
•
Self-storing Coil Air Hose, Rilsan
(not illustrated)
c/w quick coupler and male plug;
10.0 m working length; outer diame-
ter 10 mm; inner diameter 8 mm.
Stock-no. 090 105 4967
•
Hand-crank Hose Reel SA 100
(not illustrated)
c/w 20.0 m braided air hose; outer
diameter 15 mm; inner diameter
9 mm.
Stock-no. 090 105 4975
•
Automatic Retractable Hose Reel
SA 200 (not illustrated)
reversing suitable for wall and ceiling mount-
ing; retracts automatically by simply
pulling on hose; with 8 m PU air
hose; outer diameter 13 mm; inner
diameter 8 mm.
Stock-no. 090 105 4550
Accessory kits
L Accessory Kit LPZ 7-S
comprising: Blow gun, tyre inflator
gauge, tyre valve nozzle, needle tip
nozzle, paint spray gun, spray gun,
1.0 l
self-storing coil air hose.
Stock-no. 090 100 3858
•
Accessory Kit LPZ 7-P
(not illustrated)
comprising: Blow gun, tyre inflator
gauge, tyre valve nozzle, needle tip
nozzle, paint spray gun, spray gun,
10 m braided air hose.
Stock-no. 090 100 3890
•
Accessory Kit LPZ 6 (not illustrated)
comprising: Blow gun, tyre inflator
gauge, tyre valve nozzle, needle tip
nozzle, paint spray gun, 5 m braided
air hose.
Stock-no. 090 104 4487
•
Accessory Kit LPZ 4 (not illustrated)
comprising: Blow gun, tyre inflator
gauge, paint spray gun, self-storing
coil air hose.
Stock-no. 090 101 3845
•
Accessory Kit LPZ 2 (not illustrated)
contains change handle with blow
gun, tyre inflator gauge, paint spray
gun, self-storing coil air hose.
Stock-no. 090 105 5971

7. Trouble Shooting

A
Danger!
Prior to all servicing:
− Switch OFF.
− Unplug.
− Wait until the compressor has
come to a complete stop.
− Ensure the compressor and all air
tools and accessories connected
to it are relieved from pressure.
After all servicing:
− Check to see that all safety
devices are operational.
− Make sure that no tools or other
parts remain on
machine.
Compressor does not run:
•
No mains voltage.
− Check cables, plug, outlet and
mains fuse.
•
Mains voltage too low.
− Use only extension cables with
sufficient lead cross section (see
"Technical Specifications"). Avoid
using extension cable with cold
machine.
•
Compressor was
unplugging.
− Switch compressor OFF at the
On/Off switch, then ON again.
•
Motor has overheated, caused by
insufficient cooling (cooling fins cov-
ered).
− Remove cause for overheating
and allow to cool down for
approx. 10 minutes, then start
again.
Compressor runs but does not build
up sufficient pressure.
•
Drain cock on cup of filter/regulator
unit open.
− Close drain cock.
•
Check valve leaky.
− Have check valve serviced by
qualified service centre.
Air tool is not supplied with sufficient
pressure.
•
Pressure regulator not opened wide
enough.
− Open pressure regulator more.
•
Hose connection between compres-
sor and air tool leaky.
− Check air hoses, replace defec-
tive parts if necessary.

8. Repairs

A
Danger!
Repairs to electric tools must
be carried out by qualified electrici-
ans only!
Electric tools in need of repair can be
send to the service centre in your coun-
try. See spare parts list for address.
Please attach a description of the fault to
the electric tool.
or in the
stopped by