Denon AVR-X4000 Owner's Manual page 112

Contents
DTS sound mode
Sound mode type
z1
DTS NEO:X
DTS SURROUND
z2
DTS ES DSCRT6.1
z3
DTS ES MTRX6.1
DTS 96/24
DTS-HD
DTS Express
z1 This mode cannot be selected when DSD signals from Super Audio CD are input.
z2 This mode can be selected when only one surround back speaker is used and no front height speaker is used.
z3 This can be selected when "Speaker Config." – "Surr. Back" (vpage 184) is set to "1 spkr".
Front panel Display
Connections Playback
This matrix decoding technology uses the DTS NEO:X decoder to playback 2-channel source or 5.1/6.1/7.1-channel
surround sound including the surround back channel.
There are 3 modes: "Music" suited for playing music, "Cinema" suited for playing movies, and "Game" which is
optimized for playing games.
This mode can be selected when playing sources recorded in DTS.
This mode is suitable for playing discs recorded in DTS-ES. The surround back channel added using the discrete method
is played as an independent channel.
Since all channels are independent, the 360-degree spacial expressiveness and sound localization are enhanced.
This mode is suitable for playing discs recorded in DTS-ES.
The surround back channel added to the surround-left and surround-right channels by a matrix encoder at software
recording time is decoded by this unit's matrix decoder and played from each channel (surround left, surround right,
surround back).
This mode can be selected when playing sources recorded in DTS 96/24.
This mode can be selected when playing sources recorded in DTS-HD.
This mode can be selected when playing sources recorded in DTS Express.
Rear panel
Settings
Description
112
Remote
Tips Appendix
Index