movistar Home Station ADSL Installation Manual page 8

Connecting with wireless client
Windows Vista
In Windows Vista, please click on the icon
"internet access", and select "connect or
disconnect", as shown in the picture.
Then search your network from the list, you
wrote down its name in "Step 3" on the
previous page. Select it and press "connect".
Final step: enter the password or click the button on the router (common for Vista and 7)
When you have a message asking for the password to connect, you will see also the option of using
the "router button", as shown in the image below. Then press the black button for 5 seconds "WiFi /
WPS" on the back of the router. The light of "WPS" flashes for a few seconds.
Alternative: if you cannot connect using WPS button, enter the key carefully and click OK,
use the same key you wrote down in step 3 on page 6.
Attention: If the "Wifi" LED in the router has been switched off, press for 1 second the
black button on the back labeled as "Wifi / WPS" to activate it again.
More information in section 3.5 of the user manual CD Advanced Options (7).
8
Connecting with wireless client
Windows 7
In Windows 7, please click with the left mouse
button on the icon of "internet access", as
shown in the next picture.
The list of nearby networks will pop up. Please
find your network in the list, you wrote down its
name in the "Step 3" on page 6 (the "SSID" on
the back label of the router).
Then select your network with the mouse. Just
below you will see a "connect" button, click it
and continue to the next step.