En54 & Iso 7240 Functions - Zircon EN54 Installation & Configuration Manual

EN54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
1.5 EN54 & ISO 7240 Functions
This fire control panel is designed to comply with the
requirements of EN54 Part 2/4 and ISO 7240 Part 2/4.
In addition to the basic requirements of EN54-2 or ISO 7240-
2, the panel may be configured to conform with the
following optional functions - the applicable clauses of
these standards are referenced as follows:
Options
Controls:
Delay of the immediate actioning of outputs 7.11
Coincidence detection (ISO 7240, Type B)
Disablement
Test condition
Outputs:
Fire alarm device(s) (Sounders)
Fire alarm routing equipment
The following features are provided by the Power Supply
Unit (PSU) of the Zircon EN fire control panels to comply
with EN54-4 and ISO 7240-4.
Features of the Zircon EN
Power Supply Unit (PSU)
Derive power from the mains supply
Derive power from a standby battery source
Charge and monitor the standby
battery/batteries
Detect and signal various PSU faults
3
Clause
EN54 ISO 7240
7.11
7.12 7.12
9 10
10 11
7.8 7.8
7.9
7.9
Clause
5.1
5.2
5.3
5.4
997-532-000-1, Issue 1
March 2006