Specification - Zircon EN54 Installation & Configuration Manual

EN54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
8

Specification

General
The Fire Control Panel is designed to comply with the
requirements of EN54 Part 2/4 and ISO 7240 Part 2/4. In
addition to the basic requirements of EN54-2 and ISO 7240,
the panel may be configured to conform with the following
optional functions - the applicable clauses of these standards
are referenced as follows:
Options
Controls:
Delay of the immediate actioning of outputs
Coincidence Detection
Test condition
Outputs:
Fire alarm device(s) (Sounders)
Fire alarm routing equipment
This panel complies with the European Low Voltage Directive
73/23/EEC (and the amending Directive 93/68/EEC), by the
application of the safety standard EN60950.
The panel conforms with the essential protection
requirements of the EMC Directive 89/336/EEC (and the
amending Directives 92/31/EEC and 93/68/EEC), by the
application of EN61000-6-3, (emissions) and EN50130-4,
(immunity).
Mechanical:
Construction:
Dimensions (mm): 318(h) x 356(w) x 96(d)
Approx. Weight:
Environmental:
Climatic classification: 3K5, (IEC 721-2-3)
Operating temperature: -5
Humidity:
Height above sea level:Maximum, 2000m
Panel sealing:
Vibration:
EMC:
Safety:
33
Fire-resistant, ABS plastic moulded front
cover and back box. Cover contains all
user interface controls and visual
indicators.
2kg (no batteries)
o o
C to +45 C, (recommended +5
o
to 35 C)
5% to 95% R.H.
IP 30, (EN 60529)
EN 60068-2-6, 10-150Hz at 0.981ms
0.1g (Meets the requirements of
n
EN 54-2/4)
Emissions: EN 61000-6-3
Immunity: EN 50130-4
EN 60950
997-532-000-1, Issue 1
Clause
7.11
7.12
10
7.8
7.9
o
C
-2
,
March 2006