Ce Marking - Zircon EN54 Installation & Configuration Manual

EN54 & ISO 7240 2-8 Zone Conventional Fire Panel - Installation & Configuration Manual
997-532-000-1, Issue 1
March 2006
The panel can accept an unlimited number of manual
call points and a limited number of automatic detectors
per zone. Refer to Section 8 Specification for zone
current limits.
As a default, the panel is configured without delays to
outputs. If delays are to be configured, refer to Section
7.8 Primary & Secondary Delays for details.
While every effort is made to ensure the accuracy of the
content of this manual, the manufacturer reserves the
right to change the information without notice.
Installation
The control panel is easy to install providing the
recommended procedures described in this manual are
followed. Once the back box is installed, use something
suitable, such as an anti-static bag, to protect the PCBs
from being damaged. Do not re-fit the front cover until
after all other trades have completed their tasks.
Commissioning
Section 6, Commissioning
recommended commissioning procedure for the fire
control panel.
Configuration
Section 7, Configuration describes all panel
configuration procedures. Configuration is only possible
with the control panel at access Level 3. This requires
the front cover to be removed and a code-entry process
to make the panel ready for site-specific configuration.
Specification
Section 8, Specification defines all panel operating
parameters.

1.4 CE Marking

This panel is CE Marked to show that it conforms to the
requirements of the following European Community
Directives:
Electromagnetic Compatibility Directive 89/336/EEC
(and the amending Directives 92/31/EEC, 93/68/EEC)
Low Voltage Directive 73/23/EEC (and the amending
Directive 93/68/EEC).
2
describes the