Table of Contents
Advertisement
Quick set-up guide
4
Where to put your phone
• Place the base within 3
metres of a mains power
socket and 2 metres of a
phone socket so the cables
will reach.
• Make sure it's at least a
metre away from other
electrical appliances to avoid
interference.
• Don't place the phone or
base in a bathroom or other
humid area.
• The product works by
sending radio signals
between the handset and
base. The strength of the
signal depends on where you
position the base. Putting it
as high as possible can help
give you the best signal.
IMPortAnt
• Don't connect the phone line
to a phone socket until the
handset is fully charged.
• The base station should
be plugged into the mains
power socket all the time.
If you need some help, call us on 0800 218 2182* or go to www.bt.com/producthelp
1
Plug in
1. Plug the mains power
adaptor with the blue
ring on the connector
into the base, with the
cable clipped in the
groove provided.
1
The telephone line cord is pre-installed but don't
plug the other end into the wall socket yet.
2. Plug the other end
of the power adaptor
into the wall power
socket and switch on.
2
Advertisement
Table of Contents
