Sharp LC-32LE700UN Service Manual page 29

LC-32/40/46/52LE700UN
12. Removing of Bezel Ass'y, Panel Chassis Ass'y, Lens Sheet, Diffusion Plate, Back Light Chassis and LCD
Control Unit (LC-52LE700UN).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 12 lock screws ,16 lock screws and detach the Bezel Ass'y .
2. Remove the 6 Clip and detach the 52" LCD Panel Module and Panel Chassis Ass'y .
3. Detach the 2 Lens Sheet and Diffusion Plate .
4. Remove the 43 Push Rivets and 11 Support Pins and detach the Reflection Sheet .
5. Remove the 72 Push Rivets .
6. Remove the 12 Terminators and 24 connections and detach the 12 LED8 PWB1 Units and 12 LED8 PWB2 Units .
7. Detach the 6 LED6 PWB1 Units and 6 LED6 PWB2 Units .
8. Disconnect the connecting cords from the 12 connectors of the LED6 PWB1/2 Unit.
9. Detach the Back Light Chassis .
10.Detach the 2 Connecting Cord and 2 Ferrite Core .
11.Remove the 6 lock screws and detach the LCD Control Unit
4 – 13