Sharp LC-32LE700UN Service Manual page 23

6. Removing of Bezel Ass'y, Panel Chassis Ass'y, Optical Sheet, Lens Sheet, Diffusion Plate, Back Light Chas-
sis and LCD Control Unit (LC-32LE700UN).
NOTE: A clean booth is required for repair of the component units and/ or parts (LCD Panel HIRAKI, LED PWB etc.) inside the LCD panel module
unit.
1. Remove the 10 lock screws
2. Detach the 32" LCD Panel Module and Panel Chassis Ass'y
3. Detach the Optical sheet
4. Remove the 16 Push Rivets
5. Remove the 32 Push Rivets
6. Remove the 8 Terminators
7. Detach the 4 LED5 PWB1 Units
8. Disconnect the connecting cords from the 8 connectors
9. Detach the Back Light Chassis
10.Detach the 2 Connecting Cord
11.Remove the 6 lock screws
,10 lock screws and detach the Bezel Ass'y
and Lens Sheet and Diffusion Plate
and 4 Support Pins and detach the Reflection Sheet
.
and 8 connections and detach the 4 LED8 PWB1 Units
and 4 LED5 PWB2 Units
.
and 2 Ferrite Core .
and detach the LCD Control Unit
.
.
.
.
of the LED5 PWB1/2 Unit.
4 – 7
LC-32/40/46/52LE700UN
.
and 4 LED8 PWB2 Units .