Table of Contents
Advertisement
LC-32/40/46/52LE700UN
2. LC-40/46/52LE700UN
Attaching the Stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
Attach the stand in the correct direction.
Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1 Confirm that there are 12 screws (all the same size)
supplied with the stand unit.
2
Set the post for the stand unit onto the box.
1
Attach the base to the post.
2
Insert and tighten the 8 screws into the 8 holes
3
on the bottom of the base.
Hold the stand unit securely with one hand, and then
tighten the screws.
3
1
Screws
3
2
1
FRONT
2 – 6
3
Insert the stand into the openings on the bottom
1
of the TV.
Insert and tighten the 4 screws into the 4 holes
2
on the rear of the TV.
Screws
2
Soft cushion
1
To detach the stand, perform the steps in reverse order.
2
1
Hide quick links:
Advertisement
Table of Contents
