Install Your Module - Verizon ACT231 User Manual

5. You will see a picture of the location of your OBD-II connector.
Note: If needed, you can access the OBD Locator from the website or the smartphone app. On the website,
click on your username in the upper right-hand corner. From the drop-down menu, click the button labeled
OBD LOCATOR.

Install Your Module

1. Check that you have a strong signal where your vehicle is parked. Visit Verizon's interactive
coverage map: verizonwireless.com/maps.
2. Make sure your vehicle is parked outside in a safe location and the engine is turned off.
3. Now plug the module into the OBD II port (or into the extension cable if it is required).
Make sure that the module is fully seated.
31